ARO EXP 2” metallic pumps achieve flow rates of up to 172 GPM (651 LPM) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and batching in Ceramic, Paint, Oil & Gas, Chemical and Petrochemical markets.

Available with Long-life PTFE diaphragms.

Features

  • The Ultimate in heavy duty pump design.
  • Up to 4 times the life of traditional diaphragm pumps due to the EXP’s new convoluted diaphragm design.
  • Efficiency – Simul-Shift™ valve provides ultra-positive, reliable shift signal
  • Reliability – ARO’s patented ‘Unbalanced’ air valve ensures no-stall operation
  • Versatility – Broad range in materials of construction for optimum fluid compatibility
  • Environmentally Sound -Bolted construction for leak-free fluid handling and ribless fluid caps to eliminate cracking
  • Serviceability – Easier service through modular design

Accessories

  • 66312 Air Line Connection Kit: contains Piggyback Filter / Regulator, pipe nipple & 5’ section of hose
  • 67237 Diaphragm Failure Detection Kit
  • 67350-1 Cycle Counter Kit
  • 67263 Continuous-Duty Muffler
  • 67174-20 Screened Inlet Adapter Kit
  • 637369 Air Section Service Kit for PX30R
  • 637421 Air Section Service Kit for PX20A and PX20S
  • 637309-XX Fluid Section Service Kit

Pump Casing Materials

  • Aluminum
  • Cast Iron
  • Stainless Steel
  • Hastelloy-C

Diaphragm Material

  • Long Life PTFE
  • Polypropylene
  • Hytrel
  • Nitrile
  • Medical Grade Santoprene
  • PTFE(PTFE)/Santoprene backer
  • Viton

Specifications

  • Maximum Flow gpm (lpm): 172 (651)
  • Maximum Discharge Pressure psi (bar): 120 (8.3)
  • Fluid Ports Inlet/Outlet (bsp): 2” NPTF Rp2 (2-11 BSP) (Side or Center) 2” ANSI/DIN Flange with 2” pipe tap (SS only/Center)
  • Material of Construction: Aluminum, Cast Iron, Stainless Steel, Hastelloy®
  • Maximum Solids in (mm): 1/4 (6.4)
  • Maximum Dry Suction Lift ft (m): 14 (4.2)